2020 Subaru Forester install questions

Question

1. In this thread from a while ago, it was said that enabling 3x lock is not recommended for a 2019.  Does this still apply?
https://fortin.ca/en/qa/90775/LockLockLock-Forester-Sport-2019/
EDIT: May have been fixed in firmware 1.24 AKA 0.60?

2. Guide 98941, page 7.  I'm probably over analyzing this, but I assume for the Yellow/Red and Yellow/Green wires, the illustration is saying to connect the respective wires together.  Is that correct?  I figured there would be a black circle on it if that was a case.  I initially thought this was a spliced wire from the factory.

3. Will there be issues if I use an Omega RF kit and have to use firmware 0.44?

Thanks all!

Answer 1

Hello,

1- 3x lock is listed for the pts version of this vehicle.

https://fortin.ca/en/vehicles/subaru/forester/2020-push-to-start/compatibility/

2- Correct, simply match the colors and loop them back.

3- I will say that there are reports of omega kits working with evo-one and reports of them not working with evo-one. It is up to you wether you wish to try those kits or not.

 

Best regards.