2016 Hyundai Accent. No immobilizer. Cannot make blue light flash for can programming

Question

I have a 2016 Hyundai accent. Have the Can wires hooked up as shown in diagram. Grey wire is reading 3.18 VDC and Grey and black is reading 2.48VDC. Plug in wires and turn ignition to on/run position and the blue light does not flash. I am using thar-khy2 T-Harness. A1 is hooked up to E5 like in diagram.  Help......

Answer 1

Hello,

As long as the vehicle is automatic transmission, if can-bus refuses to program simply set optoin 20.2 for tachless in the evo one remote starter and hardwire the brake from the evo to the vehicle (black wire on the 20 pin connector of the evo). With these 2 modifications you wont even need can bus.

 

Best regards.