05 es330 cranks no start evo one

Question

Installed all wires and double checked rx and tx. Step 5 does not flash quickly, only solid after holding button down. Have tried reflashing multiple times. Will start with key in barrel with rfk441.

Answer 1

Hello,

What is the S/N number to the evo one?

Best Regards.

Comments

S/n 002B04243512

---

Please flash firmware 79.41 into the unit, re program it to the car and re test.

---

It's is at 79.65. Is that not correct? The newest update? That's what was suggested. Thanks

---

Sometimes older cars will need older firmware to work properly.

---

Gotcha. I will try. Thank you

---

I reflashed the unit to 79.41, led still stays red on bypass copying step. Never flashes 10 times

---

If it does not flash then you would need to verify your lt.blue and lt.blue/black wires.

---

I know I am correct on those right now and continuity is there(good connection). But I sort of remember another install and those wires being labeled backward in the diagram. Could that be possible?

---

You can try flipping them, wont hurt anything to try.

 

If that doesnt work I would suggest calling technical support when you are with the evo and the vehicle.

 

1-877-336-7797

 

Best Regards.