Evo all doesnt give me the option to use my oem fob in the flashing process

Question

Why is there no option for oem fob on an 09 suburban but that option I'd available on other chevy models?

Answer 1

Stand alone or 3x lock can be enabled by turning on option C1 and D1 in the evo-all options.

 

If settings protection is ON you must turn it OFF to be able to select the options.

 

Best Regards.

Comments

I did that but it still doesn't give me the option to use an oem key fob. It will let you do it with other 09 chevy models like the silverado but it doesn't allow it for an 09 suburban for some reason. There is certain models it allows and didn't allow and I don't get why

---

Are you in wizard mode or pro mode?

 

I only ask because I tried to replicate your complaint myself and was able to active the stand alone options for a 09 suburban without issue....

---

When in Wizard mode, the 3x lock feature will not be an option since it is not actually supported due the remotes not being functional once the car is started. If you want 3x on lock on those cars, you will need to enable the option in "pro mode".  

 

To go to Pro mode, click on the gear icon in the top right corner then choose, "go to pro mode".

---

I now tried it in pro mode and I get a message the pops up saying dcryptors limit has been reached for this car. It won't allow me to decrypted it with the oem fob in pro mode

---

That means you have dcrypted the module 3 times or more. There is a limit to prevent malicious use of modules.

 

If you provide the S/N number off the back of the module I can get that reset for you. It takes 24-48 hours for the reset to take effect.

---

Keep in mind, when simply changes options, there is no need to completely reprogram the module.

---

S/n 001a07 239064

---

I have sent your module in to have the limit reset.

 

It will be ready for use within 24-48 hours.

 

Best Regards.

---

Awesome thank you