Questions & Answers

vehicle does not remote start.

0 votes
I installed evo all in Kia Sorento SXL but after pressing 3 time to remote start, The red light come on on the Evo all, the door on lock, the welcome screen on the instrument cluster come up and the off but the vehicle does not start.
posté Sept 27, 2020 dans la catégorie Kia par DORMAINE MILLER (190 points)

1 Réponse

+1 vote
What is the S/N to the module?
répondu Sept 28, 2020 par derek g (342,790 points)
Module S/N: 001A07 141470

Went through the troubleshooting steps and still nothing. The Orange does come on on the module when the vehicle ignition is turned on manually and when the vehicle is running. Is there possibly another connection that has to be made to maybe the starter wire. I have as the connections as shown in REV.: 20190308 GUIDE # 81411 for the 2016 kia Sorento with with exception of a connection to the starter wire.

Turn OFF option D1 - Stand Alone Remote starter. 

Turn ON option D6 - Push-to-Start 

 

What do you mean by the exception of a connection to the starter wire? The connection is required in order to get a crank signal to the car. 

My installation is without the Datalink. The wiring diagram doesn't show a connection directly from the Evo all module to the rose pink (+) Starter wire at the front of the fuse box without data link. It only shows a connection from the RS7 if with the data link included.
Nothing at all happens after making this change. No response to X3 button press
The evo-all does not support 3x lock on this vehicle. You need a remote starter along with the evo-all.

 

If you want 3x lock you need an evo-one.
...