2012 G37x won't remote start unless factory fob is present in vehicle.

Question

G37 is automatic and push-to-start. I have installed the T-harness and programmed the Evo successfully multiple times. I tried different options with the Flash link updater as well.

While monitoring the Evo's LEDs, I can see the blue LED flash with each lock press. After the third press the red LED comes on for a second and the brake lights come on. Red LED flashes a few more times like it's trying to start but to no avail. It repeats this process for 2 or three times I think.

If I hit lock x3 while the key fob is in the vehicle, it starts right up.

I have double checked all my connections. Considering that it's a T-harness, this shouldn't be an issue.

Answer 1

What is the service number or S/N  to the module?

Comments

Not sure how you are going about selecting it. All i did was go to your car on our website and click the stand alone guide...

 

https://fortin.ca/en/vehicles/infiniti/g37/2012-push-to-start/

---

Yes, exactly what I did. Then I clicked on Troubleshooting Guides tab, and the guides available to me there were not the same as you pulled up. The guide you linked me specifies EX35.

---

You should be selecting the guide when you select the vehicle. Not the troubleshooting guides as they are not always update to date or vehicle specific.

---

Connected the purple/yellow to the lt.blue/black. Issue still persists, key fob needs to be in vehicle to remote start.

---

Please call tech support for furhter troubleshooting when you have the vehicle and module in hand.

 

1-877-336-7797

Mon-Fri

8-6 EST