Questions & Answers

2014 ram wont start after changing vehicle type in software

0 votes
Hi, i updated my device's selected truck. when i bought my evo from amazon it was setup for a 2015 ram 1500. my truck is a 2014 3500 diesel. after updating that; the truck wouldn't start anymore. I went ahead and re-did the key decrypting process and now i have the blue light flashing when i lock but the truck will not start. after that didnt work, the only thing i changed was in the software. I selected option "diesel" and i turned off the "lock unlock lock" option. other than that everything is at default. does anybody know whats wrong here?!
posté Juin 28, 2019 dans la catégorie Ram par joe tom (410 points)

1 Réponse

0 votes
 
Meilleure réponse
What is the service number to the module?
répondu Juin 28, 2019 par derek g (342,790 points)
élue Juin 28, 2019 par Robert T
hi Derek, thanks for the reply.

 

Service #: 003606 001980

 

is there anyway i can downgrade to get this back to the firmware it was before?

it came with 74.19 when i bought it.
commenté Juin 28, 2019 par joe tom (410 points)
The firmware is not the issue.

 

You forgot to enable option D1.1 as well as option D1.3 and D1.6.

 

Click on option D1 to expand it and enable the above mentioned options, save the options, then re test in the vehicle.
commenté Juin 28, 2019 par derek g (342,790 points)
Hi Derek, thank you very much for the support. Unfortunately enabling those additional options didn't help.

here is a list of the options that are enabled:

All A options.

C1

D1, D1.1, D1.3, D1.6, D2

F2

 

thanks again Derek
commenté Juin 30, 2019 par joe tom (410 points)

i have updated the firmware to the latest this evening. defaulted all options and confirmed that D1.1 as well as option D1.3 and D1.6. are enabled. the truck will not start. the blue light flashes three times with the remote button but nothing happens.

 

i checked the dark blue wire on the 20 pin connector and it doesn't respond when grounded. 

 

this remote starter worked before i changed the model and year in the software. are we certain this doesn't have anything to do with it?

 

edit: i put my head under the dash and confirmed all electrical connections are tight and clipped good. still NOK

commenté Oct 31, 2019 par joe tom (410 points)
Call tech support when you have the vehicle and module and time.

 

1-877-336-7797

Mon-Fri

8-6 EST.
commenté Oct 31, 2019 par derek g (342,790 points)

Questions associées:

...