Questions & Answers

Remote not start program success Chrysler 300c 2013 (push to start)

0 votes
Program success but remote not start blue light slowly rapid
posté Juil 24, 2018 dans la catégorie Chrysler par Tareq Alabbadi (130 points)

1 Réponse

0 votes
What is the service number to the module please.
répondu Juil 24, 2018 par derek g (342,860 points)
What the number do you want and were can i find it?

And the number do you mention it is where can i find it in the car or in the EVO?
commenté Juil 25, 2018 par Tareq Alabbadi (130 points)
Service number, located on the back of the module.
commenté Juil 25, 2018 par derek g (342,860 points)
001A06791349
commenté Juil 28, 2018 par Tareq Alabbadi (130 points)
Looks as though the options for 3x Lock are not enabled.

 

Simple test to confirm.

 

Ground the dark blue wire on the 20 pin connector, if the red led turns on it is not set up for stand alone.
commenté Juil 30, 2018 par derek g (342,860 points)
Now  dark blue wire grounded but still blue led binking slowly no changes
commenté Juil 30, 2018 par Tareq Alabbadi (130 points)
Remove the drk blue wire from ground and  ground the yellow/black wire on the 20 pin connector what does it do?
commenté Juil 30, 2018 par derek g (342,860 points)
Now yellow black wire grownded still no changes
commenté Juil 30, 2018 par Tareq Alabbadi (130 points)
I just took a look at the service number and noticed that the dcryptor has never been done.

 

Do you have access to the flash link updater?
commenté Juil 30, 2018 par derek g (342,860 points)
No I didn’t have the flash link updater
commenté Juil 30, 2018 par Tareq Alabbadi (130 points)
You will not be able to complete programming without the flash link.
commenté Juil 31, 2018 par derek g (342,860 points)

Questions associées:

...