Evo one won't remote start

Question

im reposting this question because my response was a little delayed. 

I have a evo one remote start syesten in my 2012 Nissan Xterra. I installed it with with the T-Harness, install guide 33161. I also have the Fortin RF642W RF Remote Kit With Two 4-Button, 2-Way remote installed.  The module programs to the car but the remote start does not work. the lock and unlock function works properly, the blue LED on the module will light up for both lock and unlock, but when I press the remote start nothing happens. No LEDs on the module light up, but the remote will flash green and beep. the red led under the yellow loop does not light up either. I also updated the module with the flash link updater,  and cut the yellow loop for the automatic transmission. Any help would be apriciated. thank you

Answer 1

You need to hold the start button for 3 seconds to remote start. That is the third button, right under unlock.

Comments

yes. Ive done that, and there is no response from the module