Questions & Answers

evo all only show red light when press tree time on factory remote

0 votes
Hi,

does anyone know why after i programmed the evo all for my 2017 toyota sienna se.. when pressing the factory remote three time it only lock the door and the evo all unit only show red light and does nothing.. (ps all the harnest are installed correctly..It has worked before until i remove to install it on another exact vehical)
fermer avec la note: Problem resolved by reseting module and re programming module to vehicle.
posté Avr 10, 2017 dans la catégorie Toyota par LEON MAI (130 points)
fermé Avr 10, 2017 par derek g

1 Réponse

0 votes
Does the dash illuminate in the vehicle when trying to remote start?

Was a reset done on the module at any time?
répondu Avr 10, 2017 par derek g (342,790 points)
Hi Derek, no, nothing showing on the dash.. Somehow it after pressing the lock three time, after a few second it automatically unlock the driver door..

 

second, not sure how to reset the unit, but it was working before until and took it off and install in on another exact vehical and go thru the programming again..
The module did program exactly as shown in the guide?

When you are testing do you have all doors,hood and tailgate closed with no oem remote within 10' of the vehicle.
yes, followed the guide to the tea!! and yes all door are locked and distance from the vehical
If you disconnect the evo completly and then close the car up and press lock 3 times on the OEM remote but on the third press you hold it for 3-5 seconds does it start?

It maybe that their is a factory module in the car. If this is the case we will need to remove it.
there is no module in my car.. i tried disconnec everything already
Alrighty, What exactly do the led's on the module do when trying to remote start the vehicle?

If the module does not start the car it will flash the pakring lights (if connected) to tell you why it doesnt start. So how many times do the parking lights flash?
You mention the module was in an identical vehicle before, you still need to reprogram the module to the new vehicle to make it work...
thanks Derek & Matthieu, i did a reset on the evo and resetting it, and reprogram to the vehical. it all working fine now.. thanks for you guys respond..
...