EVO ALL standalone starter on a PTS, which wire can be grounded on unlock to prevent shut down when door is opened?

Question

I did this on a 2007 Infinity G35 in the past and got an answer from your phone tech support and it worked. I just forgot which wire it was on the EVO ALL and if it is compatible or can be applied to other vehicles with PTS and RFID... lets say a 2007 and a 2013 Lexus ES350

Thanks

Answer 1

Toyota Lexus in Stand Alone will always shut down when you open a door. The installation replicates the factory remote starter, therefore, the vehicle needs to shut down.

With Nissan/infiniti that are 2007-2008 models. Normally, you should only be able to have takeover when the EVO sees an unlock signal on the purple/white wire. What I'm thinking, is that the persopn from tech support, made you connect the Unlock/disarm from the BCM to the purple/white from the EVO.

Answer 2

Same thing on a 2014 prius, as soon as the door is opened the vehicle shuts off, was told to ground the door trigger. Heard there an option in teh flash link to disable

Comments

Yeah I think there is a option. You need a flash link updater and the software available from fortin

---

You can't do take over on Toyota Lexus. The installation replicates OEM remote start which disables any gear shifting. In theory even if someone manages to bypass this, the car would not be able to shift.

 

Turning off the door status option would not change anything. The EVO still sees it.

Grounding the door trigger will probably cause issues with the OEM alarm and also cause the vehicle to never go into sleep, ever.

 

---

The only time take over was available on these car was when the immoblizer was bypassed through the IMI and IMO connections and the remote starter connected everywhere on the car.