why does green security light flash after takeover

Question

2002 acura el. EVO ALL After takeover the green security key light flashes. Suspect that the module should stay on for ignition cycle. Not sure why it doesnt. Re checked all wiring and its ok.  Car starts and runs ok. The only way to get the light to not come on is to start it with factory key next to the ignition.

Answer 1

Hi Brent,
 

The install requires you to cut the security wire using the White/Red and White/Blue of the EVO.

With the RED Connector of the EVO disconnected, and the vehicle remote started, the security LED should not be ON. Recommended that you try that exact test. Doing this opens the security LED wire, therefore no light should come on. If the light is still there, then it would mean the wrong wire was used.