Questions & Answers

5 brake flashes anything besides hood?

0 votes
Have the same 5 brake lights, red light on module both flashing 5 times when trying to start using both 3x lock and car link app, replaced hood pin, re flashed, re programmed module and telescamatics, set to Fortin 2, don’t believe I’ve turned opt 11off but i shouldn’t have to skirting safety devices seems like something an amateur would do, get his necktie caught in the belts while checking the oil and pocket starts the vehicle…..whatever, new system self installed worked until it didn’t, any ideas? Would be very appreciated!
posté Juin 30 dans la catégorie Ford par Jeremy Park2 (560 points)

1 Réponse

0 votes
Hello,

What is the S/N to the unit? (located on the back of the module).

Thank you.
répondu Juil 2 par derek g (342,740 points)
The serial number as follows, and keep in mind this started right after doing some adjustments using for scan with obd2 dongle, and trying multiple times to get auxiliary window roll/up down auxiliary option to work on carlink app, no prior issues whatsoever; 001A07564826 serial no. For Evo all
If you send remote start and get 5 flashes of the red led on the evo that would be hood open detection. Make sure the dark blue wire on the 20 pin connector of the evo-all is not resting at ground and the hood is closed.

I would also try unpluging your obd2 piece and perhaps reverting the settings in the vehicles computers to the way they were when the system was functional.

 

If you followed the 1 key dcryptor programming your unit is currently not programmed to the vehicle. Please re do the in vehicle key programming and dcryptor.

 

Looking at the evo-all options, please turn off the following: A14, B2, B3. They are not needed nor applicable to this 2011 ford escape standard key.

 

Best regards.
...