Questions & Answers

2010 Toyota Sequoia Power Lift Gate

0 votes
I recently installed the Evo-one along with the rfk942 remote/antenna.

I wired the Evo-one as per https://fortin.ca/download/85241/evo-one_ig_reg_bi_toy-sequoia_key_2008-2009_a_85241.pdf

Am I able to operate the power lift gate with this combination?
posté Jan 13, 2022 dans la catégorie Toyota par gullygossner (230 points)

1 Réponse

+1 vote
 
Meilleure réponse
red wire at the liftgate switch is the trigger.

You can use the (-)Trunk output, Yellow/Black from the evo 20-pin and wire it straight to that.

Always test the vehicle wire first! It should be a negative trigger.
répondu Jan 13, 2022 par Robert T (300,340 points)
élue Fev 25, 2022 par gullygossner
Thank you for the answer Robert! Does it require any changes on the firmware side?
commenté Jan 18, 2022 par gullygossner (230 points)
So I wired it up as specified but it doesn't activate the power hatch. The gate will release when pressing what I believe is the aux 1 routine but i cannot activate the power hatch.
commenté Fev 23, 2022 par gullygossner (230 points)
modifié Fev 23, 2022 par gullygossner
Increasing the pulse time to 2.5s solved this.
commenté Fev 25, 2022 par gullygossner (230 points)

Questions associées:

...