2006 Kia Sedona can't program it

Question

Hello,

I'm installing EVO-ONE with T-harness on 2006 Kia Sedona. I'm having a problem to program. The yellow led stays on solid when the key is run position. I'm not sure if I did the CAN2 wiring becuase there was no 6&14 pins on the OBD2 but found white & white black in other pins so I connected them. Please let me know what to do next urgently.

Thank you

Don

Answer 1

yellow light staying on means the light blue/black is not receiving key data. Meaning, you are not on the correct PATS wire.

 

If the vehilce does not have immobilizer, no PATS, which it might not, follow program 2 in the guide.

Comments

Thanks for your quick reply. This vehicle has immobilizer and I double checked for PATS and found correctly connected.  I can get engine started with the original key which means the red wire that is cut for PATS are correctly bypassed in the EVO ONE module otherwise it wouldn't start. Please give me further instruction on this. Thanks