I have a hard time understanding the programing of the evo-start,

Question

nissan versa 2008 manual,

got the evo-one with 442 remote, all good,

Trying to add the LTE module to my assembly, but cant figure the sequence properly,

Answer 1

Hello,

- D/C evo start lte

- Connect rf kit, program rf kit to evo-one

- D/C RF kit

- Connect evo start lte, program evo start lte to evo-one

- Connect both evo start lte and rf kit, both should work.

 

The programming sequences between the 2 are identical except there is no button to press on for the evo start lte, it will just automatically send the signal to the evo-one to program at step 5.

 

https://cdn02.fortin.ca/download/102151/EVO-ONE_IG_EVO-START_QUICK-GUIDE_F_102151.pdf

 

You can also call into our tech line when you have everything on hand, an agent can assist you in programming them to the unit.

1-877-336-7797

mon - fri

8 am - 6 pm est.

 

Best regards.

Comments

OK,I did the antenna, the 442 remote are working,

If I resume the next steps, all plug in, the antenna, the evo-start...

I then go into programing mode with the 4 brake pedal sequence...it should be done,

---

When programming the evo start lte, the rf kit antenna should NOT be plugged in. You connect the antenna at the end, after having paired the evo-start lte.