EVO-ALL-RS-FV6 for Vw Tiguan 2011

Question

Hi. I bought this EVO-ALL-RS-FV6 for 07-2010 Tiguan. I installed it. Firmware 75-41. Hardware 7. I installed the options. The first time when programming the key decryptor, I pressed and held the module button, the LED blinked, everything was correct, it saved the keys. I connected the module to the flasher and it transmitted the decrypt to the server, the server calculated and returned everything back and stitched it into the module. I disconnected the module from the flasher and connected it to the car according to the instructions. And nothing. The LED on the module is always red, does not react to anything. I tried to do a reset, according to the instructions, holding the button, connect the power supply and release it when it lights up red, then press and hold until the LED starts blinking, release the button and turn off the power .... nothing blinks, it just lights up red all the time. I tried to reflash the module with a flasher, it reflashed, now there is the 2nd entry out of 8. How to revive the module?

With best regards

Answer 1

Hello,

Here is how to correct the red led issue: https://www.wirecolor.com/en/qa/92073/faq-red-led-stuck-on?show=92073#q92073

Once that is done, master reset the evo: https://cdn.fortin.ca/en/download/61931/61931.pdf

From there set options/firmware for vehicle being worked on and re program it in the vehicle.

 

If you need the flash count reset simply provide the S/N module and i can reset it for you.

Best regards.