2019 Honda HR-V Standard key

Question

After installing the remote starter, everything work but now I have the collision detection and lane departure error lights came up on the dash. Also the lane departure physical button refused to toggle on and off.

I drove around the first day the light went away on its own, Leaving the car during the weekend and today I took for work and both light came back.

Bypass 73.39 and remote starter 1.26

Installation with THAR-ONE-HON2 and EVO-ONE

Answer 1

I would start off by checking if the lane departure connector for the actual switch was not clipped back in and worked itself loose during re assembly of the dash panels. If this is not the cause of the issue, then uninstall the tharness and other wire to wire connections and test the vehicle.

Comments

I'll try to install it back to oem see if it change anything.

I did double check the connector and the pin on the left side of both connector.

---

I've remove the remote starter the car work fine it only when I use the remote starter that the warning light all come on.

I've I try downgrading it to 73.38 as the installation manual state and remote starter at 1.26.

---

I've also use other evo-one it does the same thing. Can it be the t-harness ?