Questions & Answers

Can Evo All be used only to bypass transponder?

0 votes
1998 Ford Crown Victoria with transponder in key. This is my first fortin install and I know this vehicle is old but I figure I should start with old vehicles before moving on to newer ones! Lol I do install Ignition Interlock devices at my work so i am pretty familiar with wiring and diagrams.  Anyway, I installed a Crimestopper SP-402 as the remote starter. As long as I have the key in the ignition the remote start will start. I got the Evo All as a bypass module. I have triple checked that I am getting ignition power on yellow and getting GWR on blue from the remote starter. I have programmed the module successfully but it only cranks and no starts. I have tried programming it with 2 keys, 1 key, tried unplugging the data cable and giving it power and ground, tried grounding the GWR wire, ect. I get a successful program each time but it only cranks and no start. So I am beginning to wonder if I can even use that as a bypass module? Thanks for any help in advance!

Using Guide # 28691

Connection 1

Programming 1
posté Aout 29, 2019 dans la catégorie Ford par Dylan OMoore (130 points)

1 Réponse

+1 vote
Please provide the 12 digit service number of the module.

 

If the module is a hardware 6 please try flashing the module to firmware 4.18
répondu Aout 29, 2019 par J M (64,060 points)
001A06 895344

The module is a hardware 6 and the firmware is 4.18

Option A3 is the only option I have set to ON.
...