Why is the Evo all not sampling immobilizer data for 2004 Nissan Quest?

Question

Hello,I followed the instructions for installation..the car would start with key in ignition..also,when I press the brakes,it won't shut down...ive tried everything to make it work..did the programming and when I turn the ignition off,the red and yellow lights flash...help...

Answer 1

Disable option B2 and retry programming to the vehicle.

 

What remote starter are you using ?

Comments

crimestopper cool start rs00-gs

---

sill not saving immobilizer sample..

---

During programming did the blue led flashed rapidly ? The brake not working indicate something wrong with canbus.

---

Yes the blue led flashes rapidly...then when I turn the ignition off,it flashes red and yellow.do you mean the evoall canbus unit?I wired up the obd 2 the exact way I was told to.

---

Ok..so I downgraded the firmware to 4.18...it works..car starts when lock 3 times is pressed,shuts down when brake is pressed..now the problem is when turned on with key,it shuts off within 1 to 2 seconds...if I reset the bypass,car starts and runs,once programmed, can't start with key..