Questions & Answers

How to add RF-2WT10-SS to evo-gm3 with FT-D100 RF decoder

0 votes

How to add RF-2WT10-SS to evo-gm3 with FT-D100 RF. wihch wire do i plug from the eve-gm3 in to the FT-D100 in the sucket with plugs side byside with 2 pin and 4 pin or 4 pin and 6 pin  they are same plugs on evo-gm3 and the compustar.

Thanks 

 
posté Oct 3, 2017 dans la catégorie GMC par Martin Berube (280 points)

2 Réponses

0 votes
Here is the installation guide you would need to follow for that RF kit.

 

http://cdn.fortin.ca/download/20141/edge-2x-rf-ar2wt10-ss-install-guide-20141.pdf
répondu Oct 3, 2017 par derek g (340,410 points)
With the compustar rf kit there is a ADS Data cable do i need it for the evo-gm3 and FT-D100 ?
commenté Oct 3, 2017 par Martin Berube (280 points)
Yes make sure you swap Rx and Tx on the end that will plug into the evo-all as shown in the guide linked above.
commenté Oct 3, 2017 par derek g (340,410 points)
Ok i will..

Thank you.
commenté Oct 3, 2017 par Martin Berube (280 points)
it not the pulg that go's in to the FT-D100 it the plug that gos in to the evo-all that i have to change then. there are 3 pulg one that is for evo-one and one for evo-all and one for adding rf kits and antenna
commenté Oct 3, 2017 par Martin Berube (280 points)
modifié Oct 3, 2017 par Martin Berube
swap both side or one side?
commenté Nov 12, 2020 par Tinh tran (150 points)
0 votes
it work?
répondu Nov 12, 2020 par Tinh tran (150 points)

Questions associées:

...