Pathfinder '22 EvoALL wont start,lock,unlock

Question

Hi,

I installed Evo ALL on Pathfinder 2022 using TNIS7 harness and Crimestopper rf kit. Installation was straight forward, programming was easy as well. When I try to start car it will not. Using factory fob, car receives CAN signals (blue led blinks) and dashboard lights up. Using rfkit remote, lock unlock dont work (only lights flash, door will not lock unlock). When try to start car using rf kit remote, first it locks door, dash turns on and thats all. Evo sends CAN signals(blue) and recognize Ignition (yellow).

When I programed module I turned bypass hood switch on in options and picked Crimestopper rfkit (but this should not matter because 3xLock doesnt work either). I used firmware 92.05 (instructions states to use 92.04)
s/n: 001A07019830

Any advice, what am I doing wrong?

Thank you in advance.

Answer 1

Hello,

 

Please verify that options C1, D1, D1.10, D6, H & H2 are all on along with the default options.

 

Also being an OEM start solution, please pay close attention to the warning notes on page 1 of the guide. https://fortin.ca/download/103811/evo-all_ig_sal_bi_nis-pathfinder_pts_2022_a_103811.pdf

 

Best regards.

Comments

I was able to fix that by flashing 92.04 and reprogram again.

Thanks!

---

Glad you got it working!

Best regards.