2013 sentra push to start fix is to connect white/black wire from where to which wire exactly?

Question

I read a previous post about a nissan being wired with pre-assembled harness and EVO-ALL on 2013 push to start sentra ... and brake lights and start button light up but nothing starts...The red light on controller flashes 3 times after it tries to start.The fix was connecting the white/black wire from 19 pin connector to push to start button..I just need some guidance as to where exaclty does the white/black wire come from and where exactly am I supposed to connect it? I`m not a tech,just a guy who bought a plug and play remote start on ebay.Any help is appreciated..

Answer 1

This is an screen shot from the stand alone guide, hopefully it helps: https://fortin.ca/download/74261/evo-all_ig_tsa_bi_nis1-sentra_pts_2013-2018_a_74261.pdf

 

Without this connections the vehicle will not remote start.

 

Comments

so white/black to light green...Just curious why this wire was not put into this pre-made harness in the first place? Life would have been quite a bit easier..lol...Thanks for your help Derek..Have a nice day..Good Karma