17 Nissan Sentra, blue led slow flash, no response to 3x lock

Question

Hello, did the wiring install today, Connected all wires as per the instructions, went though the whole setup process and latest firmware. Left all settings as recommended with flash link. It is a 17 Nissan Sentra factory setup (no other aftermarket parts). I did use the remote switch as I do not have a hood pin. Also tried to turn off the setting for it ignore pin switch from CAN.

I get all the way to the last step, plug everything back in and the Blue led just flashing slowly, will not start with 3x lock on remote. Serial # is 001A07 200015.

Any help would be greatly appreciated.

Answer 1

3x lock is not working because you are not finished the in vehicle programming.

 

The blued led is flashing slowly becuase you need to run dcryptor after step 9 as indicated in the installation/programming guide for the vehicle.

 

https://fortin.ca/download/74261/evo-all_ig_tsa_bi_nis1-sentra_pts_2013-2018_a_74261.pdf

Comments

I saw that tab when I had the flashlink manager program open, I tried it but ran into an error the first time around, something about an error with the sever. When doing the decryptor on my pc, does the key fob have to be next to the evo or just by itself?

Thank you Derek.

---

You dont need the key fob near by to run dcryptor.

 

If it failed it probably just missed something in the in vehicle programming.

 

Start the programming over in the vehicle and re send dcryptor.

---

Derek thank you so much for your direction. Everything works perfectly now. Once you do one I can't belive how simple it really is.