Questions & Answers

Oem key fob support

0 votes
Hi! I have just set up the evo all in Camry 2014 se G key. I checked all connection is good. When I turn the ignition on, the yellow led is solid. I also turn on the oem remote option when I program the evo one, but when I press lock unlock lock on my key fob. It does not remote start my car. Is it something I do wrong for the wiring?
asked Sep 10, 2016 in Toyota by Hiu Leung (260 points)

2 Answers

+2 votes
Does the blue led on the evo unit flash when you press the lock or unlock buttons on the oem keyfob?

 

If the blue led does flash;

There is one thing you can try but is not guaranteed to work, but has in other toyota models, It is a labor intensive test since from my research the TPSM module (which also doubles as the wireless doorlock module is in the passenger C-pillar.

if you can locate this module and take a picture of the connector where we can see the wires coming out of the connector, we will be able to send you the oem wiring diagrams showing which wire will need to be cut to see if the oem keyfobs remain.
answered Sep 13, 2016 by Jesus Monroy (63,860 points)
There is no led blue flash when i press the lock or unlock button on my oem key fob, does it mean the evo all cannot detect the door lock and unlock signal from Doorlock data wire?
Correct.

No 3x lock on this vehicle.
+1 vote
What is the service number to the module?

 

Also we do not list the 2014 Camry G-Key as 3 lock compatible so you will need an RF kit to control remote start functionality.
answered Sep 12, 2016 by derek g (324,940 points)
service # 002B03034123

service # 002B03034123

The vehicle does not support 3x lock from the OEM remote. You will need an RF kit to control the remote starter.
...