Fortin Evo-ALL will not program

Question

2018 VW Tiguan Standard Key, Automatic Trans, no Heated steering wheel

I have the THAR-VW6 installed correctly.

The EVO-ALL will not program.

When trying to program, I hold down the programming button and connect the data link cable, light goes to blue, I release, all 3 light flash.

I have an R-link and a Flashlink.

I've flashed the EVO-ALL with the correct firmware.

Service# 001A07 367521

Please help.

Answer 1

Hello,

When you attempt to program the evo and it fails, how many times does the red led flash? 1x per second, 2x per second? etc.

Also is the vehicle equipped with the virtual cluster.

Best regards.

Comments

It does not flash red. After releasing the programming button on a blue light to program, all 3 lights flash repeatedly.

Not a virtual cluster.

---

Please re flash the firmware into the unit (64.06) and re try programming.

---

That worked.

I flashed to a different firmware, then back to 64.06, programming successful.

Thank you.