Questions & Answers

Evo All reset

0 votes
Need my EVO All reset 002505118401, had troubles reprograming for remote time.

Also question on 11 Toyota Prius install, with remote start, if i unlock doors via remote and open any doors or hood it shutsdown the motor but if i do with the hatch the motor stays running.  Using the recommended settings(except 20 min start and lock unlock lock for start and latest firmware.

And one more question, if I was wanting to add the alarm feature for this, i would hook up the extra wires according to alarm guide and settings in firmware and reflash and setup like the remote start?

Also looking at wirecolor.com wires for the 11 prius, the horn negative is not the light blue at black connector L52 at steering wheel, it is the 8th pin yellow wire, or you can also use the light blue pin 24 at white 40 pin 2C same connector as the Ignition positive.

And a wire you dont have listed Parking Positive pin 18 on 36 pin 2D(above 40 pin 2C)
asked Mar 2 in Toyota by Jason Smith3 (180 points)
edited Mar 3 by Jason Smith3

2 Answers

0 votes
Hello,

I need the s/n to the evo-all to see if it can be reset or not.

Best regards.
answered Mar 4 by derek g (340,410 points)
Sorry gave you serial to programmer let me find the evo all

It is 001A07578952
the module has been reset.

"And one more question, if I was wanting to add the alarm feature for this, i would hook up the extra wires according to alarm guide and settings in firmware and reflash and setup like the remote start?"

 

- coorect, you would connect the additional wires and simply enable the alarm option and click save. No need to flash or re-program the unit.

 

Best regards.
0 votes
SN 001A07578952
answered Mar 4 by Jason Smith3 (180 points)
...