Questions & Answers

uptions in bypass mode

0 votes
do i touch any of the options in the bypass mode. like do i allow 3x remote start or anything else
related to an answer for: Rf Kit Help Programing
asked Mar 2, 2015 in Nissan by nathan schlegel (310 points)

1 Answer

0 votes
You do not need to change anything in the bypass options. The master reset will put everything back to default.
answered Mar 2, 2015 by Robert T (300,340 points)
do i have to reprogram the unit for key immbolizer out in the truck
commented Mar 2, 2015 by nathan schlegel (310 points)
yes, as per my previous comment in the other question
commented Mar 2, 2015 by Robert T (300,340 points)
but i have to do the bypass inside my truck with the yellow led and also are you sure i have to switch the pin order on my antenna. the park lights wont flash when i press lock when im doing the program for first tech
commented Mar 2, 2015 by nathan schlegel (310 points)
The antenna plugs into the EVO-ONE but you need to swap the wires around.

 
Step 8 of the guide has 2 possible programming methods. If one does not work, try the other. What's important here is that you can actually enter programming by turning ignition on and holding down the button untitl the LED on the back of the unit starts to flash.

 
The parking light might not flash with non-Fortin remotes and also if parking lights are not connected, they will not flash.
commented Mar 2, 2015 by Robert T (300,340 points)
correct i swapped the wire around and when through both options and still nothing. when i turn my key on what leds should come on i only have the yellow led on is that correct.
commented Mar 2, 2015 by nathan schlegel (310 points)
also could you check to make sure i have all my options the right way
commented Mar 2, 2015 by nathan schlegel (310 points)

service number 002b01006776

commented Mar 2, 2015 by nathan schlegel (310 points)

remote starter options :

  • function 2 needs to be set to mode 3
  • function 32 needs to be set to mode 3

NOTE: i cannot see which rf-kit you have selected since it's done through the offline menu. It does not update our database. So I will have to take your word for it that you have enabled the Firsttech option

 

bypass options:

  • seems fine

when i turn my key on what leds should come on i only have the yellow led on is that correct.

the yellow led turning on with ignition is normal

 

commented Mar 2, 2015 by Robert T (300,340 points)
okay i will go give this a try thanks for all of your help

should i redo the bypass procedure in my truck again since i changed some options
commented Mar 2, 2015 by nathan schlegel (310 points)
i get nothing again
commented Mar 2, 2015 by nathan schlegel (310 points)
its acting like its not picking up the rf kit
commented Mar 2, 2015 by nathan schlegel (310 points)
call Fortin support when you are in the vehicle. 1-877-336-7797
commented Mar 3, 2015 by Robert T (300,340 points)

Related questions

...