Questions & Answers

2019 Nissan Versa Note no transponder

0 votes
Hi, My problem is related to both of these forms and i cant seem to get the car to start i have followed both of these guids and im still not being able to get the car to start I have the option A3 turned off. I am using the RFK 912 remotes to start the car in which they are both programmed. I have tried holding the program button until the blue lights come on. Plugging all the harness in, in both instances either pressing the program button and not pressing the program button. Either way I'm still not being able to actually get the car to start. The remotes are sending a signal and confirming but no status lights no dash lights nothing from the evo. The big connector is plugged into the back of the ignition barrel it's the giant plug with those 8 giant silver contacts The obd is plugged in. There is no transponder for the car so I didn't use that harness. In the flash Manager under pro mode in the remote starter tab I have tried options 2.1-2.4 to see if that makes a difference. None of them have made a differenceAm I missing a step?Update: After changing setting C1 I was able to remote start the car via the OEM remotes but not the fobs. The remotes are the rfk912 they are acknowledging the antenna by demonstrating a green light both on the remotes and on the antenna but they are not starting the carHere's is the serial number: SN 002B04252984 https://fortin.ca/en/qa/94079/2013-nissan-versa-standard-key-no-transponder-evo-one?show=94079#q94079https://fortin.ca/en/qa/93425/2016-versa-note-std-key-no-transponder-unable-to-program-evo-one?show=93425#q93425
asked Sep 19, 2022 in Nissan by Alex Choate (1,810 points)
reopened Sep 20, 2022 by Alex Choate

1 Answer

+1 vote
 
Best answer
In pro mode, go into the remote starter, click view other firmware and select version 1.25.

 

Once you have flashed 1.25 try re pairing the 912 remotes to the evo one in the car and re test.
answered Sep 20, 2022 by derek g (342,790 points)
selected Sep 20, 2022 by Alex Choate
Thank you Derek,

I was able to get everything set up and going. I will attach the rfk912 programming and setup sheet to this comment for anyone who may run into issues as I did.

https://fortin.ca/download/69661/rfk912-install-guide-69661.pdf

https://fortin.ca/download/68411/rfk912-user-guide-68411.pdf
...