Questions & Answers

2014 Ford Edge (key start) Evo-All no remote start but does program

0 votes
Installing the Evo-All (Service #001A06 770324) w/ t-harness in a 2014 Ford Edge with in dash key start. I have made all the connections and rechecked the can bus high and low connections. I made sure with a multi-meter through the OBD2 connector to the connector on the Evo-All that they have connection. I have programed the unit, everything has gone as planned. When I push the lock button the blue light flashes on the Evo-All and the horn honks on the second and third button push but the car does not start. The ignition does not come on.

   After contacting Fortin they had me connect the dark blue wire (A8) from the 20 pin connector to ground and the red light did not come on. Then I connected the yellow/black(A13) to ground and the car does not start.

   I first contacted My Push Cart with my issues, the first Evo-All was programmed wrong so that I had to order another unit. I installed the second unit with the same results. I contacted My Push Cart again and they walked me through the programming of the unit and still had the same result, after pushing the lock button 3x (blue light flashes with each lock button press) nothing happens, no ignition, no start.

   What can I do next to get this unit working?
asked Jan 6, 2018 in Ford by Kyle Clark (130 points)

1 Answer

0 votes
Make sure the hood and all doors are closed when trying to remote start.
answered Jan 9, 2018 by Mathieu Bertrand Collin (62,040 points)
...