Questions & Answers

2013 vw touareg no start except with brake pedal

0 votes
sn: 002b04174651

version 60.11

first install was with thar-aud1 that didnt work ignition didnt come on and it was asking to remove key from ignition

second install was wire to wire installation worked fine could program the key ect. tried remote start ignition comes on but no start at first ign on if i touch the brake it would stall soon after at second ign on (on same remote start attempt) it keeps running. verified yellow/red wire to black/red wire all seems ok. i got 12v at black/red if i touch the brake. at one time while trying car start even if yellow/red was connected.

car is a diesel if that matters.
asked Nov 7, 2021 in Volkswagen by Jerry Martin2 (310 points)

3 Answers

+1 vote
after speaking with the tech line they asked me to put option d2 to off in the bypass mode and that solved my problem. tks a lot guy great service.
answered Nov 11, 2021 by Jerry Martin2 (310 points)
Glad we got that sorted out.

 

Best Regards.
0 votes
Please enable option 18.5 in the remote starter and re test it.
answered Nov 8, 2021 by derek g (339,570 points)
0 votes
tks for the answer i tried that option as well as the other 18.# and nothing worked. made sure it was the correct black/red wire and it was. tried different firmware for bypass nothing worked now i reach the update limit.
answered Nov 8, 2021 by Jerry Martin2 (310 points)
I have reset the flash limit for you.

 

I would suggest then calling fortin technical support when you have the vehicle and module on hand.

1-877-336-7797

mon-fri

8-8 est.
...